Omni-80-9
Installation Drawing (mm)¶
Parameters¶
Omni-80-9 |
||
|---|---|---|
| Turns | T | 18 |
| Norminal voltage | V | 48 |
| No-load speed | rpm | 250 |
| Norminal speed | rpm | 165 |
| Nominal current | A | 4.9 |
| Nominal power | W | 240 |
| Nominal torque | N.M | 11 |
| Max stall current | A | 7 |
| Max stall torque | N.M | 30 |
| Resistance | 0.94 | |
| Wire connect | Y | |
| Phase to phase inductance | mH | 0.73 |
| Speed constant | rpm/v | 32 |
| Torque constant | N.M/A | 3.00 |
| Radial load | N | 1200 |
| Axial load | N | 300 |
| Rotor inertia | gc m2 | 805 |
| Number of ploe pairs | 20 | |
| Motor Weight | g | 566 |
| Working temperature | °C | (-20 ~ 80°C) |
| Max demagnetize temperature | °C | 120°C |
| Reducer ratio | 9:1 | |
| Backlash | Arc min | 5 |
| Drive | DRC20 | |
| Input voltage | V | 12-50 |
| Current | A | Normal: 15A / Instant: 30A |
| Norminal power | W | 700 |
| Communication | CAN BUS | |
| Encoder | 16bit magnetic encoder | |
| Baudrate | bps | 1M |
| Communication frequency | HZ | 2K |
| Control frequency | Torque loop:32KHZ / Speed loop:8KHZ / Position loop:4KHZ | |
| Control model | Torque loop / speed loop / position loop | |
| S-Curve | YES | |
| ID switch | YES | |
| Connector | XT2.0 | |
| Temperature sensor | YES |